ŁIN

CONNECTOR FOR INSULATION WITH POLYAMIDE STUD
SHORT EXPANSION ZONE

INDEX	CONNECTOR LENGTH L [mm]	INSULATION MATERIAL THICKNESS [mm]	QUANTITY [pcs]
ŁIN-070	70	10-20	200
ŁIN-090	90	30-40	200
ŁIN-100	100	40-50	200
ŁIN-120	120	60-70	200
ŁIN-140	140	80-90	200
ŁIN-160	160	100-110	200
ŁIN-180	180	120-130	200
ŁIN-200	200	140-150	200
ŁIN-220	220	150-170	200
ŁIN-260	260	200-210	100
ŁIN-300*	300	240-250	100
ŁIN-350*	350	290-300	100
ŁIN-400*	400	340-350	100

*Available from 2023

SHORT EXPANSION ZONE

TECHNICAL SPECIFICATION:

1) Drill a hole in the wall using a hammer drill and thoroughly remove chips

2) Place the connector in the hole

3) Anchor the connector by hammering the stud

4) Correctly installed insulation connector

CHARACTERISTIC RESISTANCE TO TENSION LOADS NRk IN CONCRETE AND IN MANSORY FOR SINGLE ŁIN ANCHOR

BASE	VOLUME DENSITY [ kg / dm³ ]	MINIMUM RESISTANCE TO COMPRESSION [ N / mm² ]	ACCORDING TO APPLICABLE STANDARD	NRk [ kN ]
Concrete C12/15 (use category A)			EN 206	0,55
Concrete C16/20 to C50/60 (use category A)			EN 206	0,80
Clay bricks MZ (use category B)	≥2,0	≥20,0	EN 771-1	1,00
Calcium silicate bricks KS (use category B)	≥2,0	≥20,0	EN 771-2	0,40
Vertically perforated clay bricks Porotherm 25 P+D (use category C)	≥0,8	≥15,0	EN 771-1	0,10
Calcium silicate hollow blocks KSL (use category C)	≥1,6	≥15,0	EN 771-2	0,65
Lightweight concrete blocks LAC (use category D)	≥0,88	≥5,0	EN 771-3	0,20
Partial safety factor for anchor resistance, ɣM (1)	2,0

1) Applicable if no domestic regulations

CORRECT LAYOUT OF CONNECTORS
IN FAÇADE INSULATION

Minimum base thickness - h [mm]	100
Minimum connector spacing - smin [mm]	100
Minimum distance between the connector and the base - cmin [mm]	100

APPROVALS TO DOWNLOAD:

OTHER PRODUCTS:

Let's stay in contact