ŁIPMO

CONNECTOR FOR INSULATION WITH POLYAMIDE STUD
WITH EXTENDED EXPANSION ZONE

INDEX	CONNECTOR LENGTH L [mm]	INSULATION MATERIAL THICKNESS [mm]	QUANTITY [pcs]
ŁIPMO-140	140	50-60	200
ŁIPMO-160	160	70-80	200
ŁIPMO-180	180	90-100	200
ŁIPMO-200	200	110-120	200
ŁIPMO-220	220	130-140	200
ŁIPMO-260	260	170-180	100
ŁIPMO-300*	300	210-220	100
ŁIPMO-350*	350	260-270	100
ŁIPMO-400*	400	310-320	100

*Available from 2023

EXTENDED EXPANSION ZONE

TECHNICAL SPECIFICATION:

1) Drill a hole in the wall using a rotary drill

2) Place the connector in the hole

3) Anchor the connector by hammering the stud

4) Correctly installed insulation connector

CHARACTERISTIC RESISTANCE TO TENSION LOADS NRk IN CONCRETE AND IN MANSORY FOR SINGLE ŁIPMO ANCHOR

BASE	VOLUME DENSITY [ kg / dm³ ]	MINIMUM RESISTANCE TO COMPRESSION [ N / mm² ]	ACCORDING TO APPLICABLE STANDARD	NRk [ kN ]
Concrete C12/15 (use category A)			EN 206	0,55
Concrete C16/20 to C50/60 (use category A)			EN 206	0,80
Clay bricks MZ (use category B)	≥2,0	≥20,0	EN 771-1	0,60
Calcium silicate bricks KS (use category B)	≥2,0	≥20,0	EN 771-2	0,65
Vertically perforated clay bricks Porotherm 25 P+D (use category C)	≥0,8	≥15,0	EN 771-1	0,25
Calcium silicate hollow blocks KSL (use category C)	≥1,6	≥15,0	EN 771-2	0,25
Lightweight concrete blocks LAC (use category D)	≥0,88	≥5,0	EN 771-3	0,30
Autoclaved concrete blocks LAC (use category E)	≥ 0,35	≥2,0	EN771-4	0,10
Partial safety factor for anchor resistance, ɣM (1)	2,0

1) Applicable if no domestic regulations

CORRECT LAYOUT OF CONNECTORS
IN FAÇADE INSULATION

Minimum base thickness - h [mm]	100
Minimum connector spacing - smin [mm]	100
Minimum distance between the connector and the base - cmin [mm]	100

APPROVALS TO DOWNLOAD:

OTHER PRODUCTS:

Let's stay in contact