ŁIMO

CONNECTOR FOR INSULATION WITH METAL STUD
AND POLYAMIDE HEAD SHORT EXPANSION ZONE

INDEX	CONNECTOR LENGTH L [mm]	INSULATION MATERIAL THICKNESS [mm]	QUANTITY [pcs]
ŁIMO-120	120	60-70	200
ŁIMO-140	140	80-90	200
ŁIMO-160	160	100-110	200
ŁIMO-180	180	120-130	200
ŁIMO-200	200	150-170	200
ŁIMO-220	220	150-170	200
ŁIMO-260	260	200-210	100
ŁIMO-300*	300	240-250	100
ŁIMO-350*	350	290-300	100
ŁIMO-400*	400	340-350	100

*Available from 2023

SHORT EXPANSION ZONE

TECHNICAL SPECIFICATION:

1) Drill a hole in the wall using a hammer drill and thoroughly remove chips

2) Place the connector in the hole

3) Anchor the connector by hammering the stud

4) Correctly installed insulation connector

CHARACTERISTIC RESISTANCE TO TENSION LOADS NRk IN CONCRETE AND IN MANSORY FOR SINGLE ŁIMO ANCHOR

BASE	VOLUME DENSITY [ kg / dm³ ]	MINIMUM RESISTANCE TO COMPRESSION [ N / mm² ]	ACCORDING TO APPLICABLE STANDARD	NRk [ kN ]
Concrete C12/15 (use category A)			EN 206	0,40
Concrete C16/20 to C50/60 (use category A)			EN 206	0,55
Clay bricks MZ (use category B)	≥2,0	≥20,0	EN 771-1	0,65
Calcium silicate bricks KS (use category B)	≥2,0	≥20,0	EN 771-2	0,35
Vertically perforated clay bricks Porotherm 25 P+D (use category C)	≥0,8	≥15,0	EN 771-1	0,10
Calcium silicate hollow blocks KSL (use category C)	≥1,6	≥15,0	EN 771-2	0,40
Lightweight concrete blocks LAC (use category D)	≥0,88	≥5,0	EN 771-3	0,30
Autoclaved concrete blocks LAC (use category E)	≥ 0,35	≥2,0	EN771-4	0,10
Partial safety factor for anchor resistance, ɣM (1)	2,0

1) Applicable if no domestic regulations

CORRECT LAYOUT OF CONNECTORS
IN FAÇADE INSULATION

Minimum base thickness - h [mm]	100
Minimum connector spacing - smin [mm]	100
Minimum distance between the connector and the base - cmin [mm]	100

APPROVALS TO DOWNLOAD:

OTHER PRODUCTS:

Let's stay in contact